PEEK Columns
Hardware for Packing Columns
- Available in 2.1, 4.6 or 7.5mm ID
- Chemically Inert
- Packing Reservoirs Match Column ID
MicroSolv’s PEEK columns are extruded from Victrex® PEEK and are of the highest
quality and reproducibility. Graphite (20%) is added to the formulation in order to
achieve a black surface with a sheen and not other chemical or physical treatment is
done leaving these columns more biocompatible.
Manufacturing columns from the crude extruded tube is performed on the finest lathes
available in the world. PEEK or Stainless Steel frits with 5 µm porosity are available to
keep the packing in place. The inner bore of the columns are not treated in any way
and receives its mirror like surface through our proprietary extrusion method. Slurry
reservoirs and packing adapters are manufactured of the same PEEK and methods as
well. This guarantees a biocompatible packing from the very start and without the
contamination of any metals or changes to your bio analytes due to the column hardware.
Thread size for 2mm ID columns; 1/4 - 28, for 4.6mm; 1/2 - 20 and for 7.5mm; 5/8 - 18.
 |
Ordering Information