| |

Worry free SS is inert and free of carbon

Product Literature
Tubing, for Mobile Phase
Last Drop for Mobile Phase
Catalog Page
| Hint: Use gloves or forceps when handling these filters to avoid contamination of your mobile phase. |
Max Flow Rates
2µm 5ml/minute
10µm 25ml/minute |

|
|
Inlet Filter – Sparging Stones for HPLC Mobile Phases
All MicroSolv Mobile Phase Filter – Sparging Stones are manufactured from the finest raw materials available.
These stones can be used as an inlet filter from your solvent reservoir bottle to the HPLC pump or can be
used for dispersion of helium while sparging to keep your solvents degassed and under positive pressure in the
reservoir.
These filters stones are made to be the highest quality available; during manufacturing, these filters move directly from our sinter oven (never touched by human hands) and are treated with 30% Nitric Acid and finally rinsed with distilled water.
Use 10 µm units as inlet filters and 2 µm units for sparging helium or other gas.
Use our Highest Purity SS to Keep your Mobile Phase Pure and Dry. Change Units at Least Every Six Months.
For Use with 1/8th Inch ID, Low Pressure Tubing
Slip On Type (with Stem)
For Use with 1/8th Inch ID, Low Pressure Tubing
Internal Thread Type
| Cat. No. |
Diam. |
Len. |
Pore Size |
Add/View |
| 48225-01 |
0.375” |
0.63” |
2µm |
Add/View |
| 48225-03 |
0.375” |
0.63” |
10µm |
Add/View |
| |
| 48225-04 |
0.375” |
1.0” |
2µm |
Add/View |
| 48225-06 |
0.375” |
1.0” |
10µm |
Add/View |
| |
| 48225-07 |
0.50” |
1.0” |
2µm |
Add/View |
| 48225-09 |
0.50” |
1.0” |
10µm |
Add/View |
|
 |
For Use with 1/16th Inch ID, Low Pressure Tubing
Slip On Type (with Stem)
| Cat. No. |
Diam. |
Len. |
Pore Size |
Add/View |
| 48221-01 |
0.375” |
0.63” |
2µm |
Add/View |
| |
| 48221-03 |
0.375” |
1.0” |
2µm |
Add/View |
| 48221-05 |
0.375” |
1.0” |
10µm |
Add/View |
| |
| 48221-06 |
0.50” |
1.0” |
2µm |
Add/View |
| 48221-08 |
0.50” |
1.0” |
10µm |
Add/View |
|
 |
|
|