OPERATION:

1. After unpacking place the Mini-Centrifuge on a flat, clear surface.



2. To open the dome press firmly downward on the lid release tab.



3. Insert-tubes in the rotor completely. Ensure that each tube is securely closed and of equal volume. If necessary add “dummy” tubes for counterbalance.



4. Load rotor as indicated below. Properly balanced loads are essential for safe and quiet operation.



5. Close rotor securely and activate the side switch. The centrifuge will not operate if the dome lid is open.



6. To stop the device deactivate the side switch. Wait until the device has completely stopped prior to releasing the dome. Remove samples.

• Do not immerse the device in water; injury due to shock or fire may result.
• Do not operate the device with the dome open.
• Do not open the dome before the rotor has ceased to spin.
• Do not insert non-standard tubes or other foreign articles into the rotor.
• Do not operate with uneven loads. Destabilized operation may result in damage to the device or injury to the user.
• Store this item at room temperature in a dry area. Do not expose to sun, moisture or extreme temperatures for prolonged periods of time.