| |
|
Color Coding |
Internal
Diameter |
Color |
| 0.0025 |
Natural |
| 0.005 |
Red |
| 0.007 |
Yellow |
| 0.010 |
Blue |
| 0.020 |
Orange |
| 0.030 |
Green |
| 0.040 |
Grey |
| 0.050 |
Black |
|
PEEK Tubing Specifications
PEEK Tubing (PolyEtherEthoxyKetone)
Super-T (Extra-Low Tolerance) +/- 0.025 mm ID and OD
Double Striped color
|
MTC Cat No. |
Description |
Pressure (bar/psi) |
Add to Cart |
| 47305-ST-02 |
Tubing, PEEK, 1/16" OD x 0.0025 ID, natural |
435 / 6300 |
Add to Cart |
| 47305-ST-05 |
Tubing, PEEK, 1/16" OD x 0.005ID, red |
420 / 6100 |
Add to Cart |
| 47305-ST-07 |
Tubing, PEEK, 1/16" OD x 0.007 ID, yellow |
400 / 5800 |
Add to Cart |
| 47305-ST-10 |
Tubing, PEEK, 1/16" OD x 0.25 mm ID, blue |
385 / 5600 |
Add to Cart |
Standard Tubing: Tolerance +/- 0.05 mm ID and OD
Striped color
|
MTC Cat No. |
Description |
Pressure (bar/psi) |
Add to Cart |
| 47305-05 |
Tubing, PEEK, 1/16" OD x 0.005 ID, red |
420 / 6100 |
Add to Cart |
| 47305-07 |
Tubing, PEEK, 1/16" OD x 0.007 ID, yellow |
400 / 5800 |
Add to Cart |
| 47305-10 |
Tubing, PEEK, 1/16" OD x 0.010 ID, blue |
385 / 5600 |
Add to Cart |
| 47305-20 |
Tubing, PEEK, 1/16" OD x 0.020 ID, orange |
350 / 4500 |
Add to Cart |
| 47305-30 |
Tubing, PEEK, 1/16" OD x 0.030 ID, green |
240 / 3500 |
Add to Cart |
| 47305-40 |
Tubing, PEEK, 1/16" OD x 0.040 ID, grey |
165 / 2400 |
Add to Cart |
| 47305-55 |
Tubing, PEEK, 1/16" OD x 0.055 ID, black |
50 / 750 |
Add to Cart |
Standard Tubing: Tolerance +/- 0.05 mm ID and OD
Solid color
|
MTC Cat No. |
Description |
Pressure (bar/psi) |
Add to Cart |
| 49305-05 |
Tubing, PEEK, 1/16" OD x 0.005 ID, red |
420 / 6100 |
Add to Cart |
| 49305-07 |
Tubing, PEEK, 1/16" OD x 0.007 ID, yellow |
400 / 5800 |
Add to Cart |
| 49305-10 |
Tubing, PEEK, 1/16" OD x 0.010 ID, blue |
385 / 5600 |
Add to Cart |
| 49305-20 |
Tubing, PEEK, 1/16" OD x 0.020 ID, orange |
350 / 4500 |
Add to Cart |
| 49305-30 |
Tubing, PEEK, 1/16" OD x 0.030 ID, green |
240 / 3500 |
Add to Cart |
Note: The data collected in column Pressure show the recommended permanent maximum working pressure at
room temperature for non-destructive solvents. Change of solvents and temperature may result in lowered mechanical stability.
Keep in mind that tight bends of the tubing, use of wrong tools for cutting and bad connections may result in mechanical damage
to the tube and by this reduce the pressure stability.
|
