MicroSolv Technology Corporation


			Text Size: A A Additional Information: Quality, all MicroSolv Universal glass vials are made from First Hyrdolytic Class 1 borosilicate Schott Tubing. All plastic vials listed in this catalog are made of virgin, medical grade polypropylene or polymethypentene. The MS Compatible vials are made without mold release agents. Clean room 10,000 is what our glass vials are manufactured in and then packaged in “clean pack” to assure our high hygienic standards. Clean Pack labels can be found on all of our vials that are made in our clean room. Opto-electronic devices monitor every single glass vial during the manufacturing process to assure a perfect fit each time and every time. Vials that do not meet the specification are blown out during manufacturing. 100% control over dimensional fit then a final inspection is performed according to DIN/ISO standards. Batch and Lot Control for all vials and caps/septa start with our manufacturing continue through packaging and ends in your lab for added control, traceability and quality. Bonded Caps are manufactured with a proprietary process of forming a permanent bond between the silicone rubber of a septa and the polypropylene cap without using any glues or binders. The bonded caps (with optional pre-slit or normal septa) are very useful to minimize missed injections on your auto sampler due to blunt needles. Preventing the septa from “plunging” into the vial saves countless hours of investigation. “EPP”-Easy Purchase Packs are kit packs that include 100 vials and 100 caps (with septa in them) under one EPP catalog number. The vials are packaged in our normal clean pack (see above) and the caps and septa are packaged in re-sealable plastic baggies. Both the vials and caps, with individual lot control numbers are boxed together in one convenient, easy to purchase pack. Short Thread Vials and Caps for the Universal Vial are manufactured differently from other vial suppliers for standard 12x32mm vials. Our Universal Vials’ thread ends in the middle of the neck of the vial so that there is still space between the edge of the cap and the shoulder of the vial to accommodate robotic arms of auto samplers. Our caps are designed to provide the right seal with these vials and still allow room for the robotic arm. Wide “Mouth” openings enables easy filling of vials including when using viscous materials. Wide Range of vial types, caps and septa and micro inserts for the Universal Vial System. Eliminate the need for crimp cap vials, other screw top vials. Inventory only one and save time, money and space. Make it easy to maintain your inventory and distribute to workers. Compatibility with Leading Auto Samplers for HPLC and GC. Among many others, the MicroSolv Universal Vial and Cap system are warranted to work in the Agilent® 1050, 1090, 7673A, 7683A, 5890, 1100 and 1200, The Waters® Alliance, Aquity, Alliance HT, Alliance 2790/2795, Shimadzu LC-10A, SIL-20A 105 Tray (Prominence), Beckman System Gold (508) and many others. For a complete listing of auto sampler compatibility click here. Dimensional Fit of these vials and caps are warranted to work with the above auto samplers and others as listed on our website. All vials are nominally rated as 12x32mm vials actual dimensions are 11.6mm x 32mm. The write on patches and graduations are not calibrated and are for filling and marking purposes only. Volume Discounts for vials and caps (sold separately) are available and automatically applied by our customer service department where appropriate at the time of order confirmation. Discounts are applied at 10 and 30 packs. Other Vials and Caps are available from MicroSolv click here.

[TOP]