Click HERE for Best-Practices for Crimping Caps on Vials.


No Application Notes information

Our goal is to provide the best Customer Experience possible. If you cannot find what you are looking for, have any questions or would like to give us a suggestion please use any of the following ways to contact us directly. We would love to hear from you.

  • Call us: 8:30AM – 6:00PM EST 1-732-380-8900 and hit 0#

  • Fax to us: 1-910-769-9435

  • Email Customer Support


We are always ready to lend any support we can. Our experienced scientists and professionals are ready to assist you with any technical support questions. Every question is considered a good question and we will work with you on a solution as fast as possible.

  • Call us: 8:30AM – 6:00PM EST 1-732-380-8900 and hit 0#

  • Fax to us: 1-910-769-9435

  • Email Technical Support


Standard aluminum caps | Safety caps | Septa only

Crimp caps, also referred to as aluminum seals can offer the longest lasting, tight seal when properly applied and crimped onto a properly matching serum finish vial. If too much force is used, you can produce broken glass vials, cap dimples, folds in the septa material, aluminum wrinkles. With too little force you can product poor seals and lack of compression.

Aluminum caps are not magnetic.

All MicroSolv™ crimp caps are manufactured with high quality pre-inserted septa. We also offer open hole caps which require septa to be purchased separately and manually inserted. Soft-Guard™ caps are the most popular brand of caps due to the design of the septa durometer which is easy for needles to pierce causing less stress on the instruments and missed injections.

Click HERE for crimp top vial ordering page.

Clear All Selections Clear All Selections Share mdi-content-copy
{{ pids.length }} PRODUCTS MATCHING
Toggle to view Images Toggle to view Table

© Copyright 2024. Microsolv. All Rights Reserved. Website & Hosting by BlueTone Media