Unions for HPLC Tubing

Click HERE for Frequently Asked Questions (FAQ) about Fittings for HPLC.

No Application Notes information

Our goal is to provide the best Customer Experience possible. If you cannot find what you are looking for, have any questions or would like to give us a suggestion please use any of the following ways to contact us directly. We would love to hear from you.

Call us: 8:30AM – 6:00PM EST 1-732-380-8900 and hit 0#
Fax to us: 1-910-769-9435
Email Customer Support

We are always ready to lend any support we can. Our experienced scientists and professionals are ready to assist you with any technical support questions. Every question is considered a good question and we will work with you on a solution as fast as possible.

Call us: 8:30AM – 6:00PM EST 1-732-380-8900 and hit 0#
Fax to us: 1-910-769-9435
Email Technical Support

Choose from a variety of HPLC connectors / unions to meet your specific configuration or length requirements.

Choose column couplers made of PEEK to connect two HPLC columns in series. Supplied with two male nuts.

Tubing connectors for different configurations include crosses (4 way), tees (3 way) or straight unions in PEEK, carbon PEEK (black) or stainless steel.

The Endure™ brand of carbon PEEK (black) high pressure unions are designed for extra durability. These fittings will endure higher temperatures, solvent exposure and over-tightening longer than standard PEEK unions and are recommended for connecting PEEK tubing.

The selection "FILTER" buttons below refine the products displayed in the ordering chart & image grid. They are described below and listed alphabetically by FILTER.

Clear All Selections Clear All Selections

Share mdi-content-copy

{{ pids.length }} PRODUCTS MATCHING

Product Ordering Information

Catalog#
Description
Pricing

49302-T02
Union, Connector, Tee, low pressure, 0.75 mm / 0.030 inches through hole with 10-32 screw threads. PEEK, round with an internal "T". ARE-Applied Research brand. 1 EA.

(click for details)

49302-T04
Union, Connector, Tee, low pressure, 0.8 mm / 0.031 inches through hole with 1/4-28 screw threads. PEEK, round with an internal "T". ARE-Applied Research brand. 1 EA.

(click for details)

49302-T10
Union, Connector, Tee, high pressure, 0.30 mm / 0.012 inches through hole with 10-32 screw threads. PEEK, round with an internal "T". ARE-Applied Research brand. 1 EA.

(click for details)

49302-T11
Union, Connector Set, Tee, high pressure, 0.30 mm / 0.012 inches through hole with 10-32 screw threads. PEEK, round with an internal T. Use with 1/16 inch tubing. ARE-Applied Research brand. 1 EA.

(click for details)

49302-T12
Union, Connector, Tee, low pressure, 1.5 mm / 0.060 inches through hole with 1/4-28 screw threads. PEEK, round with an internal Tee. ARE-Applied Research brand. 1 EA.

(click for details)

49302-T13
Union, Connector Set, Tee, low pressure, 1.5 mm through hole with 1/4-28 screw threads. PEEK, round with an internal tee. Use with 1/16 inch tubing. ARE-Applied Research brand. 1 EA.

(click for details)

47302-11
Union, Connector, Tee, High Pressure, 0.50 mm Through Holes with 10-32 Screw Threads. Carbon PEEK. Use with 1/16 Tubing. ARE-Applied Research brand. 1 EA.

(click for details)

47302-12
Union, Connector Kits, Tee, High Pressure, 0.50 mm Through Holes with 10-32 Screw Threads. Carbon PEEK Endure, with Connector Nuts. Use with 1/16 Tubing. ARE-Applied Research brand. 2/EA.

(click for details)

49302-T06
Union, Connector, Tee, Low Pressure, 1.0 mm Through Hole with 1/4-28 Screw Threads, Carbon PEEK Endure, Round with an Internal T. Use with 1/16 Tubing. ARE-Applied Research brand. 2/EA.

(click for details)

49302-T07
Union, Connector Set, Tee, low pressure, 1.0 mm through hole with 1/4-28 screw threads. PEEK, round with an internal "T". Use with 1/8th inch capillary tubing. ARE-Applied Research brand. 2/PK.

(click for details)

49302-CX-09
Union, Connector Kit, Cross, high pressure, 0.8 mm / 0.031 inches through hole with 1/4-28 screw threads. PEEK, round with an internal "X" flow pattern. Use with 1/16 inch tubing. ARE-Applied Research brand. 1 EA.

(click for details)

49302-CX-10
Union, Connector, Cross, high pressure, 0.30 mm / 0.012 inches through hole with 10-32 screw threads. PEEK, round with an internal "X" flow pattern. ARE-Applied Research brand. 1 EA.

(click for details)

49302-CX-11
Union, Connector Kit, Cross, high pressure, 0.30 mm / 0.012 inches through hole with 10-32 screw threads. PEEK, round with an internal "X" flow pattern. Use with 1/16 inch tubing. ARE-Applied Research brand. 1 EA.

(click for details)

49302-CX-15
Union, Connector, Cross, high pressure, 1.5 mm / 0.060 inches through hole with 1/4-28 screw threads. PEEK, round with an internal "X" flow pattern. ARE-Applied Research brand. 1 EA.

(click for details)

49302-CX-75
Union, Connector, Cross, high pressure, 0.75 mm / 0.030 inches through hole with 10-32 screw threads. PEEK, round with an internal "X" flow pattern. ARE-Applied Research brand. 1 EA.

(click for details)

49302-CX-01
Union, Connector, Cross, High Pressure, 1.0 mm Through Hole with 1/4-28 Screw Threads, Carbon PEEK Endure, Round with an Internal X. Use with 1/16 Tubing. ARE-Applied Research brand. 2/EA.

(click for details)

47302-25
Union, Connector, Cross, High Pressure, 0.50 mm Through Holes with 10-32 Screw Threads. Carbon PEEK Endure. Use with 1/16 Tubing. ARE-Applied Research brand. 1 EA.

(click for details)

47302-26
Union, Connector Kits, Cross, High Pressure, 0.50 mm Through Holes with 10-32 Screw Threads. Carbon PEEK Endure, with Connector Nuts. Use with 1/16 Tubing. ARE-Applied Research brand. 2/EA.

(click for details)

49402-CX-51
Union, Connector Kit, Cross, high pressure, 0.50 mm / 0.020 inches through hole with 10-32 screw threads. stainless steel, round with an internal "X" flow pattern. Use with 1/16 inch tubing. ARE-Applied Research brand. 1 EA.

(click for details)

49302-01
Union, Connector Kit, straight, high pressure, 0.30 mm / 0.012 inches through hole with 10-32 screw threads. PEEK, straight line flow pattern. Use with 1/16th inch tubing. ARE-Applied Research brand. 1 EA.

(click for details)

49302-04
Union, Connector, low pressure, 0.5 mm / 0.020 inches through hole with 10-32 mm screw threads. PEEK, straight line. ARE-Applied Research brand. 1 EA.

(click for details)

49302-06
Union, Connector, low pressure, 0.8 mm / 0.031 inches through hole with 10-32 mm screw threads. PEEK, straight line. ARE-Applied Research brand. 1 EA.

(click for details)

49312-02
Union, Connector, low pressure, 0.8 mm / 0.031 inches through hole with 1/4-28 mm screw threads. PEEK, straight line. ARE-Applied Research brand. 1 EA.

(click for details)

49312-06
Union, Connector, low pressure, 1.5 mm / 0.060 inches through hole with 1/4-28 mm screw threads. PEEK, straight line. ARE-Applied Research brand. 1 EA.

(click for details)

49302-03
Union, Connector, high pressure, 0.30 mm / 0.012 inches through hole with 10-32 screw threads. PEEK, straight line. ARE-Applied Research brand. 1 EA.

(click for details)

45302-03
Union, Connector, Low Pressure, with 1/4-28 Screw Threads. Nylon. ARE-Applied Research brand. 1 EA.

(click for details)

47302-01
Union, Connector, High Pressure, 0.5 mm Through Hole with 10-32 Screw Threads, Carbon PEEK Endure, Straight Line. Use with 1/16 Tubing. ARE-Applied Research brand. 1 EA.

(click for details)

47302-02
Union, Connector Kits, High Pressure, 0.50 mm Through Hole with 10-32 Screw Threads, Carbon PEEK Endure, Straight Line with Connector Nuts. Use with 1/16 Tubing. ARE-Applied Research brand. 2/EA.

(click for details)

49502-02
Union, Connector, Low Pressure, 1.0 mm Through Hole with M6Screw Threads. POM Endure. Use with 1/16 Tubing. ARE-Applied Research brand. 2/EA.

(click for details)

49402-06
Union, Connector, high pressure, 0.8 mm / 0.031 inches through hole with 10-32 mm screw threads. Stainless steel. Straight line. ARE-Applied Research brand. 1 EA

(click for details)

49402-01
Union, Connector Kit, high pressure, 0.25 mm / 0.010 inches through hole with 10-32 mm screw threads. Stainless steel, straight line. Use with 1/16 inch tubing. ARE-Applied Research brand. 1 EA.

(click for details)

49402-02
Union, Connector Kit, high pressure, 0.50 mm / 0.020 inches through hole with 10-32 mm screw threads. Stainless steel, straight line. Use with 1/16 inch tubing. ARE-Applied Research brand. 1 EA.

(click for details)

49405-03
Union, Connector Kit, high pressure, 0.50 mm / 0.020 inches through hole with 10-32 mm screw threads. Stainless steel, straight line. Use with 1/16 inch tubing. ARE-Applied Research brand. 1 EA.

(click for details)

49405-04
Union, Connector Kit, high pressure, 0.80 mm / 0.031 inches through hole with 10-32 mm screw threads. Stainless steel, straight line. Use with 1/16 inch tubing. ARE-Applied Research brand. 1 EA.

(click for details)

Added To Cart!