This thin-walled PTFE (Polytetrafluoroethylene) tubing is extruded from virgin PTFE. No additives are added to the original PTFE material.

This tubing is used widely in all low-pressure, laboratory applications including before and after an HPLC Pump such as with Mobile Phase Delivery and Solvent Waste Systems. Since PTFE tubing contains "micro-pores" in the tubing wall, which allows a quick air exchange, consideration for use with degassed and oxygen-sensitive solvents is needed.

• Internal and Outer Dimensional Tolerance: +/- 0.20mm

• Color: Natural, Translucent

• Wall Thickness; 0.80 mm

• Pressure rating: 510 psi (35 bar)

• Max Temperature: 260°C

NOTE: This item is in compliance with the RoHS EU Directive 2011/65/EU and its amendment (EU) 2015/863 regarding the restriction of hazardous substances.

Other lengths available:

• 1 meter roll

• 5 meter roll

• 10 meter roll

• 25 meter roll

Custom cuts also available. Please contact Customer Service.

This thin-walled PTFE (Polytetrafluoroethylene) tubing is extruded from virgin PTFE. No additives are added to the original PTFE material.

This tubing is used widely in all low-pressure, laboratory applications including before and after an HPLC Pump such as with Mobile Phase Delivery and Solvent Waste Systems. Since PTFE tubing contains "micro-pores" in the tubing wall, which allows a quick air exchange, consideration for use with degassed and oxygen-sensitive solvents is needed.

• Internal and Outer Dimensional Tolerance: +/- 0.20mm

• Color: Natural, Translucent

• Wall Thickness; 0.80 mm

• Pressure rating: 510 psi (35 bar)

• Max Temperature: 260°C

NOTE: This item is in compliance with the RoHS EU Directive 2011/65/EU and its amendment (EU) 2015/863 regarding the restriction of hazardous substances.

Other lengths available:

• 1 meter roll

• 5 meter roll

• 10 meter roll

• 25 meter roll

Custom cuts also available. Please contact Customer Service.