All MicroSolv PEEK (PolyEtherEthoxyKetone) tubing is similarly color coded to identify the Internal Diameter for easy ID and to eliminate using the wrong tubing by mistake. 
  • Melting Point - 340°C and continuous service temperature is 250°C.
  • Minimum bending radius < 50 mm
  • Click HERE for ordering information.
Color Coding:
Internal Diameter Color
0.0025" Natural
0.005" Red
0.007" Yellow
0.010" Blue
0.020" Orange
0.030" Green
0.040" Grey
0.050" Black

Dimensions & Pressure Ratings:
Ultra-T™ PEEK Tubing 

Tolerance +/- 0.025 mm ID and OD (Extra Low)

Cat No. Description Pressure (bar/psi)  
47305-ST-02 Tubing, PEEK, 1/16" OD x 0.0025” ID, natural 435 / 6300 Add to Cart
47305-ST-05 Tubing, PEEK, 1/16" OD x 0.005”ID, red 420 / 6100 Add to Cart
47305-ST-07 Tubing, PEEK, 1/16" OD x 0.007” ID, yellow 400 / 5800 Add to Cart
47305-ST-10 Tubing, PEEK, 1/16" OD x 0.25 mm ID, blue 385 / 5600 Add to Cart

Standard Striped Tubing

Tolerance +/- 0.025 mm ID and OD
 
Cat No. Description Pressure (bar/psi)
47305-05 Tubing, PEEK, 1/16" OD x 0.005” ID, red 420 / 6100 Add to Cart
47305-07 Tubing, PEEK, 1/16" OD x 0.007” ID, yellow 400 / 5800 Add to Cart
47305-10 Tubing, PEEK, 1/16" OD x 0.010” ID, blue 385 / 5600 Add to Cart
47305-20 Tubing, PEEK, 1/16" OD x 0.020” ID, orange 350 / 4500 Add to Cart
47305-30 Tubing, PEEK, 1/16" OD x 0.030” ID, green 240 / 3500 Add to Cart
47305-40 Tubing, PEEK, 1/16" OD x 0.040” ID, grey 165 / 2400 Add to Cart
47305-55 Tubing, PEEK, 1/16" OD x 0.055” ID, black 50 / 750 Add to Cart

Standard Solid Color Tubing

Tolerance +/- 0.025 mm ID and OD
Cat No. Description Pressure (bar/psi)  
49305-05 Tubing, PEEK, 1/16" OD x 0.005” ID, red 420 / 6100 Add to Cart
49305-07 Tubing, PEEK, 1/16" OD x 0.007” ID, yellow 400 / 5800 Add to Cart
49305-10 Tubing, PEEK, 1/16" OD x 0.010” ID, blue 385 / 5600 Add to Cart
49305-20 Tubing, PEEK, 1/16" OD x 0.020” ID, orange 350 / 4500 Add to Cart
49305-30 Tubing, PEEK, 1/16" OD x 0.030” ID, green 240 / 3500 Add to Cart

Note: The data collected in column ’Pressure’ show the recommended permanent maximum working pressure at room temperature for non-destructive solvents. Change of solvents and temperature may result in lowered mechanical stability. Keep in mind that tight bends of the tubing, use of wrong tools for cutting and bad connections may result in mechanical damage to the tube and by this reduce the pressure stability.

© Copyright 2024. Microsolv. All Rights Reserved. Website & Hosting by BlueTone Media