No Knowledge Base information

No Application Notes information

Our goal is to provide the best Customer Experience possible. If you cannot find what you are looking for, have any questions or would like to give us a suggestion please use any of the following ways to contact us directly. We would love to hear from you.


We are always ready to lend any support we can. Our experienced scientists and professionals are ready to assist you with any technical support questions. Every question is considered a good question and we will work with you on a solution as fast as possible.


Protect Your HPLC Columns While In Use | Keep Systems In Service Longer

Guard Columns are a very good way to protect your columns while in use. Guard columns should always match your analytical or prep column's stationary phase since the matching phases will make your column a few millimeters longer but will not change the selectivity. If you choose a different phase, you may be trapping some of your analytes. This technique is well known but, not considered column protection.

Guard columns will adsorb many chemical entities as well as undissolved particles prior to reaching your column. These particles may permanently adsorb to the analytical column changing it's character and selectivity. When the guard column is no longer functioning, showing changes to your peak shape or retention time, it’s time to replace it.

The Holders for the Cogent guard systems are listed on this page and the actual guard cartridges are listed with their respective stationary phases.

  • Click HERE for Pre-Column Filters to protect your Columns.

Clear All Selections Clear All Selections Share mdi-content-copy
{{ pids.length }} PRODUCTS MATCHING
Toggle to view Images Toggle to view Table
 

Copyright © 2021 Microsolv. All Rights Reserved.
Website & Hosting by BlueTone Media