Tubing Connector Fittings, High Pressure, Two Pieces, 1/16", PEEK, Natural, Small Hex Head, Short Length and 10-32 Screw Threads. Use with Double Cone Ferrules. Wrench Tighten, MicroSolv Brand. 10/PK.

Additional Info:

These Two Piece, "Male Nuts" are used to connect PEEK or Stainless Steel tubing in the high pressures zones of HPLC systems.

This fitting has a 7mm diameter knurled head, 11mm total length (top to bottom), 7mm Thread Length and requires a Double Cone Ferrule, sold separately. Click HERE for Ferrule Ordering Information.

2 Piece Male Nuts are often chosen because they can be used at slightly higher pressures compared to 1 Piece Nuts. The required, Single Coned Ferrules will swage tubing grip it and not spin as you turn the Nut.

As Ferrules wear down, they need to be replaced. This Nut can be reused with new Ferrules.

Click HERE for single unit package quantity.



Copyright © 2021 Microsolv. All Rights Reserved.
Website & Hosting by BlueTone Media