Click HERE for Frequently Asked Questions about tubing for the Laboratory.

Click HERE for Low Pressure Tubing Specifications.

No Application Notes information

Our goal is to provide the best Customer Experience possible. If you cannot find what you are looking for, have any questions or would like to give us a suggestion please use any of the following ways to contact us directly. We would love to hear from you.

  • Call us: 8:30AM – 6:00PM EST 1-732-380-8900 and hit 0#

  • Fax to us: 1-910-769-9435

  • Email Customer Support


We are always ready to lend any support we can. Our experienced scientists and professionals are ready to assist you with any technical support questions. Every question is considered a good question and we will work with you on a solution as fast as possible.

  • Call us: 8:30AM – 6:00PM EST 1-732-380-8900 and hit 0#

  • Fax to us: 1-910-769-9435

  • Email Technical Support


PFA tubing | Low pressure zones | High Temperatures.

Use low pressure tubing on all HPLC systems; before the injector, after the detector, on mobile phase inlet tubing and “to waste” tubing. Low pressure tubing is also used for low pressure LC systems where chemical inertness is desired. All MicroSolv™ low pressure tubing is pure and chemically inert.

PFA Tubing (PerFlourAlkoxy) - Similar to PTFE but less permeable, is extruded from virgin PFA. We do not add any additives to the original PFA material. PFA tubing and capillaries do not contain micro-pores in the tubing wall to the same extent as PTFE tubing.

This tubing is often used when clarity, flexibility and higher temperatures are desired. Do not exceed 260⁰C.

Click HERE for specifications.

Clear All Selections Clear All Selections Share mdi-content-copy
{{ pids.length }} PRODUCTS MATCHING
Toggle to view Images Toggle to view Table

© Copyright 2024. Microsolv. All Rights Reserved. Website & Hosting by BlueTone Media