Chat Icon
 

Click HERE for more information about Mobile Phase Handling.


No Application Notes information

Our goal is to provide the best Customer Experience possible. If you cannot find what you are looking for, have any questions or would like to give us a suggestion please use any of the following ways to contact us directly. We would love to hear from you.

We are ready to lend any support we can. Our experienced scientists and professionals are ready to assist you with any technical support questions. Every question is considered a good question and we will work with you on a solution as fast as possible.

Solid Bottle Caps | Solvent Delivery Caps | Parts & Accessories

Mobile Phase Bottles are important for the proper upstream fluid delivery of any HPLC instrument. Keeping solvents clean of debris, prevention of atmospheric oxygen and CO2 absorption and evaporation of the more volatile solvent can be the difference between reproducible and non-reproducible results. The cap is important in protecting your mobile phase in the bottles. Most labs use these Bottle Caps to comply with their HPLC GLP requirements.

MicroSolv Mobile Phase Delivery Caps:

  • Have Inert, Medical Grade PTFE Liners

  • Prevents Contamination

  • Allows Proper Venting

  • The Delivery Cap assembly can be autoclaved.

The Cap "insert" is made from medical grade PTFE protecting your mobile phase from plastic or wax film contamination. Keeping these caps on the bottles with tubing threaded through the holes prevents dust and dirt from getting in and minimizes outgassing or absorption of CO2 from the atmosphere.

Solid Mobile Phase Bottle Caps:

The quality of screw threads are important to note and all MicroSolv™ Mobile Phase Bottle Caps have the proper thread and pitch for MicroSolv™ bottles to assure proper sealing.


The Selection "FILTER" buttons refine the Products displayed in the Ordering Chart. They are described below and listed alphabetically by FILTER.

  • Closed Top - Caps used for storing bottles or transporting them.

  • Delivery Cap - Cap, PTFE Insert and Accessories for Mobile Phase Delivery.

  • GL 32 Threads- Caps with threads that are for 32mm bottles.

  • GL 45 Threads - Caps with threads that are 45mm bottles.

  • Open Hole - Replacement Cap for Delivery Cap.

  • Plugs - Solid nuts for unused holes in the Delivery Cap.

  • Pouring Rings - Replacement rings for reducing spilling during pouring.

Toggle to view Images Toggle to view Table
 

Copyright © 2019 Microsolv. All Rights Reserved.
Website & Hosting by BlueTone Media