Overview

The Window Maker™ is designed to create detection windows in fused silica CE capillaries using a controlled heating process. To ensure consistent performance and safe operation, the unit must be supplied with the correct electrical power and operated according to established electrical requirements.

Users outside regions that provide 115 VAC service should verify that appropriate voltage conversion equipment is used before connecting the device.

Standard Operating Power Requirements

Normal operating specifications for the Window Maker™ are:

• Voltage: 115 VAC
• Power Consumption: 115 Watts
• Current Draw: 1 Amp

These values represent typical operating conditions during normal use.

Use in Regions with 230 VAC Power

In countries or laboratories where 230 VAC electrical service is standard, a step-down transformer is required.

The transformer should convert:

• 230 VAC input
• To 115 VAC output

For reliable operation, the transformer should have additional capacity beyond the normal operating load to accommodate startup conditions and line-voltage fluctuations.

A transformer capable of supplying approximately:

• 115 VAC
• 2 Amps

is generally recommended.

Grounding Requirements

Proper grounding is an important safety requirement.

The Window Maker™ should:

• Be connected to a properly grounded power source.
• Never be operated without an earth ground connection.
• Be used in accordance with laboratory electrical safety procedures.

Grounding helps support both user safety and equipment protection.

Electrical System Considerations

Before installation, laboratories should verify:

• Available supply voltage
• Transformer compatibility (if required)
• Ground continuity
• Outlet suitability
• Compliance with local electrical requirements

Proper electrical setup can help maximize equipment reliability and operating consistency.

Best Practices

For safe operation:

• Confirm the input voltage before connecting the unit.
• Use only properly rated step-down transformers when required.
• Maintain a reliable earth ground connection.
• Periodically inspect power cords and electrical connections.
• Follow laboratory electrical safety procedures.

These practices help ensure dependable performance and extend equipment service life.

Key Takeaways

• Window Maker™ devices operate at 115 VAC.
• Typical power consumption is approximately 115 watts.
• Normal current draw is approximately 1 amp.
• A step-down transformer is required for 230 VAC electrical systems.
• Additional transformer capacity is recommended to accommodate operating variations.
• Proper grounding should be maintained at all times.

Additional Resources

For CE capillary window preparation equipment, replacement components, operating guidance, available configurations, and product selection assistance, view:

Window Maker™ Specifications, Accessories, and Application Resources