Is the Wheel-Type Tubing Cutter Compatible with Copper Tubing?
Yes.
Although the tubing cutter was originally designed for:
- Stainless steel tubing
- PEEK tubing
it can also be used successfully with copper tubing. The cutter is engineered to produce clean, consistent cuts while minimizing deformation of the tubing and helping maintain the internal diameter.
Why Tubing Cut Quality Matters
Poorly cut tubing can lead to:
- Restricted flow paths
- Increased dead volume
- Poor fitting connections
- Leaks
- Reduced chromatographic performance
Using a precision tubing cutter helps ensure square, clean cuts that are suitable for high-performance fluidic systems.
Cutter Specifications
Cutting Wheel Thickness
- 0.36 mm
The thin cutting wheel helps create a precise cut while minimizing distortion of the tubing wall.
Best Practices for Cutting Copper Tubing
To obtain the best results:
- Tighten the cutter gradually during the cutting process.
- Avoid excessive force that may deform the tubing.
- Inspect the cut end for burrs or deformation.
- Ensure the tubing end is square before installation.
- Deburr the tubing when required by the application.
These practices help maintain proper fluidic connections and system performance.
Applications
The wheel-type tubing cutter is suitable for preparing:
- Stainless steel tubing
- PEEK tubing
- Copper tubing
- Laboratory fluid transfer tubing
- Chromatography tubing assemblies
Key Takeaways
- The wheel-type tubing cutter can be used with copper tubing.
- The cutter is designed to help protect the tubing internal diameter.
- The cutting wheel thickness is 0.36 mm.
- Proper cutting technique helps ensure clean fluidic connections and reliable performance.