Tubing Connector Fittings, high pressure, one piece, 1/16 inch, PEEK, Natural, standard size head but a long length with 10-32 screw threads. Finger tighten, ARE-Applied Research brand. 10/EA.

Additional Info:

These all PEEK tubing connector fittings are used to connect PEEK or Stainless Steel tubing in the high pressures zones of HPLC systems.

Fitting has a 12 mm diameter knurled head, 25 mm total length (top to bottom) with an 16 mm thread length.

The long length is useful when your column or union or detector has a deep threaded fitting and the extra length is needed to seat the tubing properly. The beveled inlet hole helps to make threading the tubing through the fitting easier.

Click HERE for single unit quantity.

 

© Copyright 2024. Microsolv. All Rights Reserved. Website & Hosting by BlueTone Media