Vials, Snap Top, Plastic. Clear, 300ul MicroVial. An 11mm snap-ring and 12x32mm outer dimensions. For use as an autosampler vial. MICROSOLV Brand. 100/PK.
Additional Info:
The 9532C‑0PV MICROSOLV™ Brand Snap‑Top Plastic MicroVial is a 300 µL polypropylene autosampler vial designed for routine analytical applications where plastic vials are preferred over glass. These vials are manufactured from virgin, medical‑grade polypropylene and are translucent for easy visualization of sample volume.
Each vial features a built‑in clear insert with a total fill capacity of 300 µL, supporting residual volumes as low as ~2 µL, depending on autosampler configuration and sample viscosity. This design helps maximize usable sample volume when working with limited or valuable samples.
Plastic microvials are commonly selected for samples that react with borosilicate glass and are widely used in bio‑analysis and aqueous sample workflows. This vial provides a practical, cost‑effective option for laboratories that require low‑volume handling without specialty surface treatments or certified LC‑MS materials.
Important Use Guidance Snap caps and snap‑top vials are not generally recommended for LC‑MS applications or other critical analyses involving volatile solvents, including aqueous systems. For these applications, screw‑thread vials with properly matched caps and septa are generally preferred to reduce evaporation and maintain sample integrity.
Key Features
Medical‑Grade Polypropylene Construction
Virgin, medical‑grade polypropylene
Translucent body for sample visibility
Suitable for routine analytical use
Integrated Low‑Residual Insert
Built‑in clear insert with 300 µL capacity
Residual volume as low as ~2 µL (autosampler dependent)
Supports efficient low‑volume sample recovery
Plastic Alternative to Glass
Suitable for samples that interact with glass
Commonly used in bio‑analysis and aqueous workflows
No glass‑related adsorption concerns
Snap‑Top MicroVial Format
11 mm snap‑ring closure
12 × 32 mm autosampler‑compatible dimensions
Simple, practical design for routine use
Why Choose MICROSOLV™ 300 µL Plastic MicroVials?
The 9532C‑0PV is selected when laboratories need:
A plastic microvial alternative to glass
Low residual volume from small sample sizes
Reliable performance for routine chromatography
Compatibility with aqueous and bio‑derived samples
A cost‑effective snap‑top microvial option
These microvials are commonly used in quality control laboratories, research environments, and bio‑analytical workflows, where plastic vials are preferred and LC‑MS certification is not required.
Typical Applications
Routine HPLC and UHPLC autosampling
Bio‑analysis and aqueous sample handling
Low‑volume sample preparation
Quality control testing
Samples incompatible with glass
Related Products and Options