Vials, Snap Top, Plastic. Clear, 300ul MicroVial. An 11mm snap-ring and 12x32mm outer dimensions. For use as an autosampler vial. MICROSOLV Brand. 1000/CS.
Additional Info:
The 9532C‑0PV‑K MICROSOLV™ Brand Snap‑Top Plastic MicroVial is the case‑quantity configuration (1000/CS) of the standard 300 µL polypropylene microvial. It is intended for high‑throughput and cost‑sensitive workflows where plastic vials are preferred over glass.
These microvials are manufactured from virgin, medical‑grade polypropylene and are translucent for easy visualization of sample volume. Each vial includes a built‑in clear insert with a total fill capacity of 300 µL, supporting residual volumes as low as ~2 µL, depending on autosampler design and sample viscosity.
Plastic microvials are a popular choice for samples that react with borosilicate glass and are widely used in bio‑analysis and aqueous sample workflows. Supplied in case quantities, this configuration supports lower per‑unit cost and uninterrupted supply for routine operations.
Important Use Guidance Snap caps and snap‑top vials are not generally recommended for LC‑MS applications or other critical analyses involving volatile solvents, including aqueous systems. For these applications, screw‑thread vials with properly matched caps and septa are generally preferred to reduce evaporation and maintain sample integrity.
Key Features
Medical‑Grade Polypropylene Construction
Virgin, medical‑grade polypropylene
Translucent body for sample visibility
Suitable for routine analytical use
Integrated Low‑Residual Insert
Built‑in clear insert with 300 µL capacity
Residual volume as low as ~2 µL (autosampler dependent)
Supports efficient recovery from small samples
Plastic Alternative to Glass
Appropriate for samples that interact with glass
Commonly used in bio‑analysis and aqueous workflows
No glass‑related adsorption concerns
High‑Throughput Case Quantity
11 mm snap‑ring closure
12 × 32 mm autosampler‑compatible dimensions
Supplied 1000 vials per case for operational efficiency
Why Choose MICROSOLV™ 300 µL Plastic MicroVials – Case Quantity?
The 9532C‑0PV‑K is selected when laboratories need:
Plastic microvials in bulk quantity
Very low residual volume from limited samples
Compatibility with aqueous and bio‑derived samples
A cost‑effective snap‑top microvial for routine use
Consistent supply for high‑throughput operations
These microvials are commonly used in quality control labs, research environments, and bio‑analytical workflows, where plastic is preferred and specialty LC‑MS certification is not required.
Typical Applications
Routine HPLC and UHPLC autosampling
Bio‑analysis and aqueous sample handling
Low‑volume sample preparation
Quality control testing
Samples incompatible with glass
Related Products and Options