Slurry Reservoir Kit, All-PEEK, for packing 2.1 mm ID columns that are very short length. Reservoir is 50 mm long with a 4.6 mm ID, complete with all parts and accessories needed to pack bioinert All-PEEK columns. ARE-Applied Research brand. 1 EA.

Additional Info:

This kit is for packing All-PEEK columns 2.1 mm ID x 30 mm long or shorter.

The Reservoir Body included in this kit is 50 mm long with 4.6 mm ID and has an internal volume of approximately 0.8 ml. This reservoir is equipped with 1/2-20 external threads on both sides. The adapter has an internal 1/4-28 screw thread on one side and internal 1/2-20 screw threads on the other side. The adapter connects the reservoir to the column being packed.

Kit includes everything you need to pack a bioinert All-PEEK column:

  • One Slurry Reservoir - the "body" which is black PEEK.

  • One End Fitting to connect tubing from a pump to the reservoir.

  • Two PEEK sealing rings for the bottom and top connection.

  • One Packing Adapter to connect the reservoir to the column.

  • One ETFE sealing ring for the top of the column connection.

How to assemble slurry reservoir and column for use. Click HERE.

Columns and accessories to be packed are sold separately. Click HERE for ordering information.

This All-PEEK Slurry Reservoir Kit is designed and manufactured for packing only our All-PEEK HPLC short length columns (30 mm or less) with 2.1 mm ID. This Reservoir and components are matched for maximum performance and are not supported for use with stainless steel or other packing systems. Also, it is recommended to thoroughly clean each part individually and not keep the Packing Reservoir tightly assembled when not in use.

 

© Copyright 2024. Microsolv. All Rights Reserved. Website & Hosting by BlueTone Media