Adapter, for use with low to medium pressure HPLC. Waters female to Waters male connection, 0.40 mm / 0.016 bore size. PEEK. ARE-Applied Research brand. 10/PK.

Additional Info:

This all-PEEK adapter is very useful for Waters® HPLC instruments or columns. One side has a Waters style female screw thread port and the other side has a Waters style screw thread male connector. Click HERE for the differences between Waters and standard connectors.

  • Maximum Temperature: 100°C

  • Maximum Pressure: 8,000 psig.

  • Click HERE for a pack of 5.

The "flat" section on the knurled adapter allows to use a wrench for an extra 1/8 of clockwise turn for tighter sealing or a slight counterclockwise turn to help remove if a tight fitting is too hard for hand removal. The flat section can also be used to hold the adapter in place with a wrench while the male nut is tightened in the adapter.


© Copyright 2024. Microsolv. All Rights Reserved. Website & Hosting by BlueTone Media