Chat Icon

Click HERE for Frequently Asked Questions about tubing for the Laboratory.

Click HERE for Low Pressure Tubing Specifications.

No Application Notes information

Our goal is to provide the best Customer Experience possible. If you cannot find what you are looking for, have any questions or would like to give us a suggestion please use any of the following ways to contact us directly. We would love to hear from you.

We are always ready to lend any support we can. Our experienced scientists and professionals are ready to assist you with any technical support questions. Every question is considered a good question and we will work with you on a solution as fast as possible.

Tefzel Tubing | For Low Pressure Zones - ETFE

Use low pressure tubing on all HPLC systems; before the injector, after the detector, on mobile phase inlet tubing and “to waste” tubing. Low pressure tubing is also used for low pressure LC systems where chemical inertness is desired. All MicroSolv™ low pressure tubing is pure and chemically inert.

This low pressure tubing has the highest pressure rating for mobile phases. This tubing is extruded from virgin ETFE without any additives mixed into the original ETFE material. ETFE tubing is widely used in low and medium-pressure laboratory applications due to the relatively high burst-pressure. Please be aware that ETFE tubing is not resistant to all chemicals. Some organic solvents may cause swelling and reduce the pressure stability.

Click HERE for Polymeric Tubing Specifications

Toggle to view Images Toggle to view Table

Copyright © 2021 Microsolv. All Rights Reserved.
Website & Hosting by BlueTone Media