Hydrophobic Compounds Method Transfer to Near UHPLC - AppNote
November 14, 2013
/
/
/
/
Separation of Hydrophobic Compounds by HPLC & UHPLC

This AppNote shows separation of analytes within a range of hydrophobicity. A simple gradient is used to elute all the compounds and baseline separation is obtained for the critical pair (peaks 4 and 5) and the least hydrophobic compound is adequately retained.

A comparison is shown in the figure below with a 4μm Cogent Bidentate C18 Column and a similar 2.o (2.2µm) Column. The retention profiles are quite comparable, meaning Method Transfer from one Column to the other will be easy to achieve.

 
Separation of Hydrophobic Compounds Chromatograms

Peaks:
1. Acetanilide, 2. Benzonitrile, 3. Methyl Benzoate, 4. Ethyl Benzoate,
5. Phenyl Benzoate, 6. Benzyl Benzoate, 7. Bibenzyl 8. Triphenylamine

Separation of Hydrophobic Compounds Chemical Structures

Method Conditions
Columns: Cogent Bidentate C18 2.o™, 2.2 μm, 120 Å; Cogent Bidentate C18™, 4 um, 100 Å
Catalog Nos.: 40218-05P-2; 40018-05P-2
Dimensions: 2.1 x 50 mm for both Columns

Mobile Phase
:
-- A: DI Water / 0.1% Formic Acid (v/v)
-- B: Acetonitrile / 0.1% Formic Acid (v/v)

Gradient
:

Time (minutes) %B
0 20
1 20
25 80
26 80
27 20

Injection vol.
: 1 µL
Flow rate: 0.3 mL / minute
Detection: UV @ 254 nm

Sample Preparation:
Mixture of solutes in 80:20:0.1 Acetonitrile / DI Water / Formic Acid Diluent. Peak identities were confirmed with individual standards.

t 0 : 0.7 minutes
 


Attachment  
No 274 Transfer HPLC Method to UHPLC with Hydrophobic Compounds pdf 1 Mb  Download File

 

Related Articles

  1. Dimethylarginine Asymmetric ADMA 4um vs 2.o Diamond Hydride Column - AppNote

© Copyright 2026. MICROSOLV. All Rights Reserved. Website & Hosting by BlueTone Media