Adapter, for use with low to medium pressure HPLC. 1/4-28 female to male luer connection, 1.3 mm / 0.051 bore size. PEEK. ARE-Applied Research brand. 10/PK.

Additional Info:

This wider bore, all-PEEK adapter has a 1/4-28 threaded female port on one side and a male Luer slip connector on the other.

These easy to install adapters are great tools for priming HPLC instruments through the prime purge valve with a syringe and tubing.

  • Maximum Temperature: 100°C

  • Maximum Pressure: 8,000 psig.

  • Click HERE for pack of 5.

  • Click HERE for 10-32 threaded adapter.

The "flat" section on the knurled adapter allows to use a wrench for an extra 1/8 of clockwise turn for tighter sealing or a slight counterclockwise turn to help remove if a tight fitting is too hard for hand removal. The flat section can also be used to hold the adapter in place with a wrench while the male nut is tightened in the adapter.


© Copyright 2024. Microsolv. All Rights Reserved. Website & Hosting by BlueTone Media