Click HERE for more information about Sample Loops.

No Application Notes information

Our goal is to provide the best Customer Experience possible. If you cannot find what you are looking for, have any questions or would like to give us a suggestion please use any of the following ways to contact us directly. We would love to hear from you.

  • Call us: 8:30AM – 6:00PM EST 1-732-380-8900 and hit 0#

  • Fax to us: 1-910-769-9435

  • Email Customer Support

We are always ready to lend any support we can. Our experienced scientists and professionals are ready to assist you with any technical support questions. Every question is considered a good question and we will work with you on a solution as fast as possible.

  • Call us: 8:30AM – 6:00PM EST 1-732-380-8900 and hit 0#

  • Fax to us: 1-910-769-9435

  • Email Technical Support

PEEK Sample Loops with volumes of up to 20μl are manufactured of tubing with the closest tolerance (OD and ID: +/-0.025 mm) available on the market, the Ultra-T™ PEEK tube, which guarantees the smallest volume deviation possible thus providing better results. The tolerances for competitors tubing used for sample loops OD and ID are +/-0.05 mm.

Stainless steel Sample Loops use tubing that is welded and annealed. The tubing is tested according to EN 10204/3.1B and is cut using EDC (electronic discharge) techniques to achieve square and burr-free end for zero-dead volume connections. Tolerances for SS tubing and capillaries are +/- 0.025mm for both OD and ID.

Sample Loops with other volumes may be available upon request. Use the Customer Service pull down menu above to contact us.

Clear All Selections Clear All Selections Share mdi-content-copy
{{ pids.length }} PRODUCTS MATCHING
Toggle to view Images Toggle to view Table

© Copyright 2024. Microsolv. All Rights Reserved. Website & Hosting by BlueTone Media