Chat Icon
 

Click HERE for Frequently Asked Questions (FAQ) about tubing for the laboratory.

Click HERE for tips and best practices on cutting stainless steel tubing.


No Application Notes information

Our goal is to provide the best Customer Experience possible. If you cannot find what you are looking for, have any questions or would like to give us a suggestion please use any of the following ways to contact us directly. We would love to hear from you.

We are always ready to lend any support we can. Our experienced scientists and professionals are ready to assist you with any technical support questions. Every question is considered a good question and we will work with you on a solution as fast as possible.

Tubing Tool Box | Tubing Straighteners | Flanging Tool | Cutters | Holders

High Pressure and Low Pressure tubing needs different types of tools to cut them properly and to keep them working optimally.

Stainless Steel tubing is difficult to cut and bend correctly. Care must be taken to achieve the best results in HPLC and using the proper tools is essential.

To straighten SS tubing, bend without kinks or remove kinks use one of our most popular items, the Beta Tools™. Choose either the original Beta Tool™ with a needle nose (red) or the newer, Beta Tool-2™ (black) with a snub nose that allows you to reach further into the instrument.

Use the MicroSolv™ Stainless Steel Tubing Cutter, (Cat# 46001-01), for very good tubing cuts when precut tubing is not available or will not work. The cutting wheel operates like a plumber’s pipe cutter, it minimizes burrs and will not kink your tubing. Replacement wheels are available.

The Scoring Pliers for use with SS or other metal HPLC tubing is designed not to cut your tubing but to score it properly and easily. Once it is scored, you can break it creating a minimal amount of burrs and avoid crimping the inner diameter. It is recommended that you use a file to clean out the tubing after breaking it.


The Selection "FILTER" buttons refine the Products displayed in the Ordering Chart. They are described below and listed alphabetically by FILTER.

  • Beta Tools - Precision Pliers to remove internal kinks, straighten and properly bend, stainless steel tubing.

  • Flangy the Tool™ - Complete Tool Kit to make perfect flanges for low pressure tubing to work with Flangeless Male Nuts.

  • Tubing Cutters - Various tools for Cutting Stainless Steel, PEEK and Low Pressure Tubing.

  • Tubing Holder - Used to hold PEEK or Stainless Steel tubing without kinking at 90 or 180 degree angles.

  • Tubing Tools - Various tools for working with and cutting PEEK or Stainless Steel Tubing.

Toggle to view Images Toggle to view Table
 

Copyright © 2019 Microsolv. All Rights Reserved.
Website & Hosting by BlueTone Media