Tubing Tool Box | Tubing Straighteners | Flanging Tool | Cutters | Holders
High Pressure and Low Pressure tubing needs different types of tools to cut them properly and to keep them working optimally.
Stainless Steel tubing is difficult to cut and bend correctly. Care must be taken to achieve the best results in HPLC and using the proper tools is essential.
To straighten SS tubing, bend without kinks or remove kinks use one of our most popular items, the Beta Tools™. Choose either the original Beta Tool™ with a needle nose (red) or the newer, Beta Tool-2™ (black) with a snub nose that allows you to reach further into the instrument.
Use the MicroSolv™ Stainless Steel Tubing Cutter, (Cat# 46001-01), for very good tubing cuts when precut tubing is not available or will not work. The cutting wheel operates like a plumber’s pipe cutter, it minimizes burrs and will not kink your tubing. Replacement wheels are available.
The Scoring Pliers for use with SS or other metal HPLC tubing is designed not to cut your tubing but to score it properly and easily. Once it is scored, you can break it creating a minimal amount of burrs and avoid crimping the inner diameter. It is recommended that you use a file to clean out the tubing after breaking it.
The Selection "FILTER" buttons refine the Products displayed in the Ordering Chart. They are described below and listed alphabetically by FILTER.
Beta Tools - Precision Pliers to remove internal kinks, straighten and properly bend, stainless steel tubing.
Flangy the Tool™ - Complete Tool Kit to make perfect flanges for low pressure tubing to work with Flangeless Male Nuts.
Tubing Cutters - Various tools for Cutting Stainless Steel, PEEK and Low Pressure Tubing.
Tubing Holder - Used to hold PEEK or Stainless Steel tubing without kinking at 90 or 180 degree angles.
Tubing Tools - Various tools for working with and cutting PEEK or Stainless Steel Tubing.