Packing Adapter, PEEK, 4.6 mm ID, Column Packing Hardware, ARE-Applied Research brand. 1 EA.
No Application Notes information
Our goal is to provide the best Customer Experience possible. If you cannot find what you are looking for, have any questions or would like to give us a suggestion please use any of the following ways to contact us directly. We would love to hear from you.
Call us: 8:30AM – 6:00PM EST 1-732-380-8900 and hit 0#
Fax to us: 1-910-769-9435
Email Customer Support
We are always ready to lend any support we can. Our experienced scientists and professionals are ready to assist you with any technical support questions. Every question is considered a good question and we will work with you on a solution as fast as possible.
Call us: 8:30AM – 6:00PM EST 1-732-380-8900 and hit 0#
Fax to us: 1-910-769-9435
Email Technical Support
All-PEEK HPLC column hardware is used for compounds that chelate or interact with the stainless-steel frits and tubes. We offer the all-PEEK column hardware including all-PEEK slurry reservoirs and replacement parts.
Made of Victrex™ PEEK, this all-PEEK column packing system is machined to produce reliable packing results with an upper limit of 300 bar. It's also biocompatible to match the PEEK columns hardware being packed.
Click HERE for all-PEEK column, frits and end fitting hardware.
NOTE: Our technical support team strongly recommends that the Cogent column filter, included with each column, be used with all HPLC columns whenever possible. Click HERE for details.
NOTE: We do not recommend using PEEK columns and hardware above 50C, higher temperatures will reduce the stability of the material drastically.
The selection "FILTER" buttons below refine the products displayed in the ordering chart & image grid. They are described below and listed alphabetically by FILTER.
© Copyright 2023.
Microsolv. All Rights Reserved.
Website & Hosting by BlueTone Media