Tefzel tubing | For low pressure zones | ETFE
Use low pressure tubing on all HPLC systems; before the injector, after the detector, on mobile phase inlet tubing and “to waste” tubing. Low pressure tubing is also used for low pressure LC systems where chemical inertness is desired. All MicroSolv™ low pressure tubing is pure and chemically inert.
This low-pressure plastic tubing has the highest-pressure rating for plastic tubing used for mobile phases. This tubing is extruded from virgin ETFE without any additives mixed into the original ETFE material. ETFE tubing is widely used in low and medium-pressure laboratory applications due to the relatively high burst-pressure. Please be aware that ETFE tubing is not resistant to all chemicals. Some organic solvents may cause swelling and reduce the pressure stability.
ETFE Ethylene tetrafluoroethylene belongs to a PFAS group but is PTFE free. Click HERE for polymeric tubing specifications.