Adapter, for use with Low to Medium Pressure HPLC. Waters female to 1/4-28 male connection, 0.4 mm bore size. PEEK. ARE-Applied Research brand. 1 EA.

Additional Info:

This finger tightened adapter makes changing from Waters male nuts to non-Waters connections very convenient.

The "flat" section on the knurled adapter allows for an extra 1/8 of clockwise turn for tighter sealing or a slight counterclockwise turn to help remove if a tight fitting is too hard for hand removal. The flat section can also be used to hold the adapter in place with a wrench while the Waters male nut is tightened in the adapter.

Click HERE for Waters adapters to 10-32 connections.



© Copyright 2023. Microsolv. All Rights Reserved.
Website & Hosting by BlueTone Media