Most Popular polymeric tubing | Low pressure zones | PTFE.
Use low pressure tubing on all HPLC systems; before the injector, after the detector, on mobile phase inlet tubing and “to waste” tubing. Low pressure tubing is also used for low pressure LC systems where chemical inertness is desired. All MicroSolv™ low pressure tubing is pure and chemically inert. We offer 4 different types for your specific needs.
PTFE (Polytetrafluoroethylene) aKa Teflon™ - This lowest cost plastic tubing is widely used in all low-pressure laboratory applications. Please be aware that all PTFE tubing contains micro-pores in the tubing wall. These micro-pores allow for a quick air exchange. This is of special consideration for degassed and oxygen-sensitive solvents. Our PTFE tubing is extruded from virgin PTFE. We do not add any additives to the original PTFE material, except for color particles in the solid-colored tubing.
Click HERE for polymeric tubing specifications.
The selection "FILTER" buttons below refine the products displayed in the ordering chart & image grid. They are described below and listed alphabetically by FILTER.